鼎盛彩票

Welcome to Dongguan Jin Wu Hongye Machinery Equipment Co. Ltd.! please call the national unified service phone 0769-82036811 Chinese   |   English   |   Japanese
东莞市金午宏业焊割设备有限公司   电话
about us
product
Company
technical support
Sales network
contact us
 
Company dynamics
 
How to choose their own products for the processing center
Time: 2017-04-13 09:32:04    Browse times:
CNC machining center should be how to choose? 
      The history of the processing center in China is not very long, but the development is very rapid, especially with the diversification of the product, the diversification of raw materials, the requirements and functions of the machine are constantly changing, and thus spawned All kinds of processing centers, then how to choose the most suitable for our products, the procurement is a very important issue, in the work of Kim Jong Da Machinery Co., Ltd. this time, so I have a good understanding of the processing center, the following Tell you how to choose your own machine. 
1, processing rhythm and the number of machine tools estimated according 
       to the selected workpiece, and then analyze the process line, in this process selected in the processing center ready to process the process, the timing of these operations estimated. According to the current process parameters, the cutting time of each process is estimated, and the auxiliary time is usually 10% -20% of the cutting time. In addition, the time required for each small and medium-sized machining center is about 10-20 seconds, so that the single operation time is: t order = t cut + t + (10-20s) = t cut + (10% -20%) T cut + (10-20s) with a single process time is not difficult to calculate the annual output. 300 working days a year, the machine operating rate by 75% -85% basis, if the calculation results of the output value of less than the target value, but almost the same, modify the process parameters; if the gap is large, should consider increasing the number of machine tools configuration. 
2, the choice of machine specifications According 
       to determine the size of the workpiece size, the corresponding machine to determine the size of the table and the three linear coordinate system travel. The size of the table should ensure that the workpiece can be successfully mounted on the workpiece, the processing size must be in the coordinate travel, in addition to consider the tool space and the coordinates of the interference area restrictions. 
3, the accuracy of the selected machine according to the workpiece 
       machining accuracy requirements, the choice of the appropriate level of precision machine tools, mass production of parts, the actual processing of the accuracy of the value may be positioning accuracy of 1. 5-2 times. Ordinary machine tool batch processing 8 precision workpiece, precision machining accuracy of up to 5-6 level, but there must be constant temperature and other process conditions, so the use of precision machine tools, high prices. 
4, the choice of 
       tooling capacity CNC machining center manufacturers of the same specifications of the machine, usually set up 2-3 different capacity knife library, such as horizontal machining center knife library capacity of 30,60,80, etc. The processing center has 16,24,32 capacity of the magazine. When the user is selected, the required quantity can be determined based on the process analysis results of the workpiece. The capacity of the magazine is usually determined by the number of tools required for a part in a single clamping, since the other parts are machined , Need to re-arrange the tool, otherwise the tool management is complex and prone to error. From the statistical point of view of vertical processing center selection of 20 knife around the knife library, horizontal machining center is selected 40 knife around the knife is appropriate. Of course, according to the actual needs of the final to determine. For machining centers with flexible manufacturing units (FMCs) or flexible manufacturing systems (FMSs), the magazine capacity should be selected for large capacity magazine, or even for interchangeable magazine.   
5, the machine selection function and accessories        selected CNC machining center machine, in addition to the basic functions and basic parts, there are users to provide their own requirements according to their own selection of functions and accessories, said the selection function, select the attachment (optional accessories) The With the development of numerical control technology, the choice of more and more content, the price of the host in the proportion of the host is also growing, so the purpose of a large number of unknown accessories is not economical, the so-called "prepared" Ordering ideas are essentially wasteful. Therefore, when the selection should be a comprehensive analysis, but also give due consideration to long-term factors. Select the function mainly for the numerical control system, the kind of price increase is not much, but the use of many convenient features, should be properly configured a little more, and can be more than one machine common accessory, you can consider a machine, But it must be considered that the interface is generic. Follow the above points, I believe we can choose a more in line with the standard CNC machining center. When selecting a CNC machining center machine, in addition to the basic functions and basic parts, there are functions and accessories that are provided by the user according to their own requirements, and the selection function is selected, and the accessories (optional accessories) are selected. With the development of numerical control technology, the choice of more and more content, the price of the host in the proportion of the host is also growing, so the purpose of a large number of unknown accessories is not economical, the so-called "prepared" Ordering ideas are essentially wasteful. Therefore, when the selection should be a comprehensive analysis, but also give due consideration to long-term factors. Select the function mainly for the numerical control system, the kind of price increase is not much, but the use of many convenient features, should be properly configured a little more, and can be more than one machine common accessory, you can consider a machine, But it must be considered that the interface is generic. Follow the above points, I believe we can choose a more in line with the standard CNC machining center.

Tel: 0769-82036811     Fax:0769-82036800
Jin Wu Hongye Machinery Equipment Co. Ltd.   Address: Tangxia Town, Dongguan city in Guangdong Dongguan Lin Cun Tian Xin No. 50-1

友情链接:鸿宇娱乐  鸿宇娱乐  鸿宇娱乐  鸿宇娱乐  鸿宇娱乐  菲博娱乐  菲博娱乐  鸿宇娱乐  菲博娱乐平台  

免责声明: 本站资料及图片来源互联网文章,本网不承担任何由内容信息所引起的争议和法律责任。所有作品版权归原创作者所有,与本站立场无关,如用户分享不慎侵犯了您的权益,请联系我们告知,我们将做删除处理!